Licensed & Insured, in Fort Wayne and surrounding areas. Metal Roof Installation · Standing Seam Metal Roofing · Metal Roof Replacement.
Your Free Quote Request
All your work handled by qualified professionals in Fort Wayne
Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.
Included in your service
Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.
Included in your service
Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.
Included in your service
Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.
Included in your service
Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.
Included in your service
Priority leak response: we trace the leak to its real source instead of caulking the symptom.
Included in your service
The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.
Included in your service
Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.
Included in your service
The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.
Included in your service
Steel strength under a textured stone finish, with strong hail and wind performance.
Included in your service
Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.
Included in your service
Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.
Included in your service
Flashing is the number one leak point on any metal roof, and it is what we fabricate best.
Included in your service
Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.
Included in your service
Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.
Included in your service
A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.
Included in your service
Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.
Included in your service
Barns, workshops, churches, and light commercial metal roofing across the county.
Included in your service
Reach us by phone at (260) 238-9399 or fill out the estimate form. We get back to you within 24 hours, no commitment required.
Our Metal Roofing Contractor visits your property, evaluates the project, and provides a written quote before any work begins.
Our crew completes the metal roofing and leaves your property clean and tidy. Full cleanup is included.
Continuous training, professional equipment, meticulous and code-compliant work
Full coverage on all our job sites, no exceptions
Emergencies, weekends, holidays: available when you need us
Response within 24h, no commitment, by phone or form
Available Mon-Sun 7am-7pm
We serve in Fort Wayne and surrounding areas · On-site visits included · Free estimate within 24h
Fort Wayne Metal Roofing is a team of local certified professionals based in Fort Wayne. We respond quickly in Fort Wayne and surrounding areas with professional equipment suited to every job.
Free estimate, transparent pricing, no subcontracting. Tell us about your roof. We'll handle the rest.
📞 Call (260) 238-9399⭐⭐⭐⭐⭐ 4.9/5 · 12 verified Google reviews
“Our old barn roof was rusted through in spots and we figured it was a goner. These guys came out, walked the whole thing with us, and put on new corrugated panels over the entire 60-foot span. The barn's dry for the first time in years and it looks sharp too.”
Agricultural Metal Roofing
“The metal roof over our Victorian porch had been leaking around the flashing for who knows how long. They tracked down the problem, redid the flashing and sealed it up in one afternoon. No more drips on the porch swing.”
Metal Roof Repair
“Needed a new metal roof on our hay barn before the season turned. Crew of four knocked out the whole thing in two days, cleaned up every last screw and scrap, and the price came in right where they quoted. Hard to ask for more than that.”
Commercial & Agricultural Metal Roofing
“We went with standing seam on the house and I'm glad we did. The crew was meticulous about the trim and the panels line up perfectly. Only gripe is they were booked out a few weeks longer than I hoped, but worth the wait.”
Standing Seam Metal Roofing
“Had a leak that showed up right around our chimney every time it rained hard. Turned out the flashing was shot. They replaced it and re-sealed everything, and we've had zero issues since. Relieved is an understatement.”
Chimney & Skylight Repair
“Tore off the old shingles and put down a brand new metal roof on our ranch house right before the fall rains hit. The color match to our trim turned out even better than the samples. Neighbors have already asked for their number.”
Metal Roof Replacement
“After a scary winter with snow sliding off the metal roof in sheets, we had them install snow guards along the whole front. They explained the options clearly and the install was quick. Should've done this years ago.”
Snow Guards & Ice Protection
“Called them out for an inspection on our Tudor-style place because I wasn't sure if the metal roof was still holding up. They got up there, checked the seams and fasteners, and gave me a straight answer instead of a sales pitch. Turns out it just needed a few screws replaced and they handled it on the spot.”
Metal Roof InspectionReal photos of our work in Fort Wayne · Each image shows the final result achieved for our clients
Indicative estimates: your free personalized quote is always exact
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Standing seam installation | Starting at $12/sq ft | Concealed fasteners and full ice-and-water protection included; steep pitch and complex valleys raise the rate |
| Exposed fastener panel installation | Starting at $8/sq ft | Corrugated or ribbed panels with underlayment; barns and simple gable roofs stay at the low end |
| Metal shingle or stone-coated steel | Starting at $10/sq ft | Stamped or stone-coated panels with matching trim; historic district detailing adds labor |
| Tear-off and deck repair | On estimate | Number of shingle layers, soft sheathing and chimney flashing condition all need an on-site look |
| Travel | Included | in Fort Wayne and surrounding areas, no separate call-out or mileage fee |
| Estimate | Free | Response within 24 hours at (260) 238-9399, no obligation to book |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Standing seam installation, simple gable | Starting at $10/sq ft | Includes tear-off, underlayment, roll-formed panels, and standard trim on an accessible single-pitch roof. |
| Standing seam installation, complex roof | Starting at $14/sq ft | Valleys, dormers, turrets, and multiple penetrations raise labor and trim cost on older Fort Wayne homes. |
| Standing seam over existing shingles | On estimate | Retrofit cost depends on existing layers, deck condition, and whether a sub-frame is required by code. |
| Chimney and skylight flashing | On estimate | Priced per penetration because masonry and curb conditions vary widely from roof to roof. |
| Travel | Included | In Fort Wayne and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (260) 238-9399, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Full tear-off with exposed-fastener metal roof | Starting at $9/sq ft | Includes tear-off, decking inspection, underlayment, and new panels; decking repair moves the price |
| Full tear-off with standing seam | Starting at $13/sq ft | Concealed fasteners and full ice-and-water shield; roof pitch and flashing detail raise the rate |
| Metal shingle or stone-coated steel replacement | Starting at $12/sq ft | Panel system with shingle or shake profile; historic district color restrictions may add review time |
| Decking and flashing rebuild during tear-off | On estimate | Priced after we open the roof and see the extent of ice-dam rot and failed flashing |
| Travel | Included | In Fort Wayne and surrounding areas, no separate call-out or mileage fee |
| Estimate | Free | Response within 24h at (260) 238-9399, no obligation to book |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Exposed-fastener panel retrofit over one shingle layer | Starting at $7/sq ft | Includes underlayment, trim, fasteners, and labor; price rises with pitch and roof complexity. |
| Standing seam retrofit over shingles | Starting at $11/sq ft | Concealed fasteners and longer panels cost more; steeper roofs and cut-up layouts push it higher. |
| Metal shingle or stone-coated steel retrofit | Starting at $10/sq ft | Stamped or coated panels cost more per square; intricate hips and valleys add labor. |
| Deck repair or re-sheathing before retrofit | On estimate | Soft or rotted decking must be replaced before new steel goes on, so we price it after inspection. |
| Travel | Included | in Fort Wayne and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (260) 238-9399, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Screw and washer replacement | Starting at $450 | Covers pulling failed fasteners, installing new gasketed screws, and water-testing the repair line. |
| Flashing and penetration repair | Starting at $650 | Rebuilds step or counter flashing at a chimney or skylight, reseals the lap, and water-tests. |
| Panel replacement (single section) | Starting at $900 | Removes and matches one damaged panel; price rises with pitch, height, and panel profile. |
| Storm or hail damage repair | On estimate | Needs an on-site look to count panels and document the damage for an insurance claim. |
| Travel | Included | In Fort Wayne and surrounding Allen County towns, with no separate call-out or mileage fee. |
| Estimate | Free | Response within 24 hours at (260) 238-9399, with no obligation to book the work. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Diagnostic inspection and minor leak repair | Starting at $450 | Includes roof inspection, leak tracing, small fastener or flashing fix, and water test. |
| Fastener replacement and re-sealing | Starting at $650 | Covers pulling failed screws, installing new gasketed fasteners, and re-torquing along the leak line. |
| Standing seam or panel repair | Starting at $900 | Re-crimping or replacing separated panels; price moves with panel length and access difficulty. |
| Flashing, chimney, or skylight rebuild | On estimate | Complex penetration work requires an on-site look to scope the flashing detail and material. |
| Emergency tarping after storm | Starting at $350 | Temporary weatherproof cover to stop active water; credited toward the permanent repair if booked. |
| Estimate | Free | Response within 24 hours at (260) 238-9399, no obligation to book the repair. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Small residential re-fastening | Starting at $750 | Covers a contained run of failed screws and washers on a typical single-story home roof. |
| Full-slope re-fastening | Starting at $1,450 | Replaces every fastener on one slope, priced by roof size, pitch, and access around landscaping. |
| Barn or pole building re-fastening | On estimate | Large agricultural roofs vary widely by square count and screw pattern, so we walk it first. |
| Emergency storm re-fastening | On estimate | Same-day or next-day scheduling after wind or hail, priced by urgency and damage extent. |
| Travel | Included | In Fort Wayne and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (260) 238-9399, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Corrugated panel roof, simple outbuilding | Starting at $5.50/sq ft | Includes panels, gasketed screws, eave trim, and closures; steep pitch or tear-off moves it up |
| R-panel roof on a shop or pole building | Starting at $6.25/sq ft | Includes 26-gauge panels, trim, and ridge cap; purlin repair or long runs add cost |
| Residential corrugated or 5V re-roof | Starting at $7.50/sq ft | Includes tear-off of one layer, underlayment, and flashing; historic district trim adds labor |
| Re-fastening and closure replacement | Starting at $1.75/sq ft | New gasketed screws and closures on sound panels; rusted-through steel changes the scope |
| Complex or large-scale job | On estimate | Multi-building farms, steep Victorian roofs, and deck repairs need an on-site look first |
| Estimate | Free | Response within 24 hours at (260) 238-9399, no obligation to book |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Architectural shingle profile | Starting at $9/sq ft | Includes tear-off, underlayment, and standard flashing on a typical single-story ranch. |
| Slate-look or shake profile | Starting at $11/sq ft | Premium profiles cost more; steep pitch and dormers add labor and material waste. |
| Complex or historic home | On estimate | Multiple valleys, chimneys, and deck repair need an on-site look before pricing. |
| Travel | Included | In Fort Wayne and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24 hours at (260) 238-9399, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Stone-coated steel roof replacement | Starting at $9/sq ft | Includes tear-off, underlayment, panels, and flashing; pitch and roof complexity move the price. |
| Retrofit over existing shingles | Starting at $7.50/sq ft | Battens and panels over a sound roof layer; code limits on existing layers apply. |
| Complex or steep-pitch roof | On estimate | Valleys, dormers, multiple stories, and steep pitches need an on-site look before pricing. |
| Travel | Included | In Fort Wayne and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (260) 238-9399, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Copper flat-seam porch or bay window roof | Starting at $20/sq ft | Includes hand-fabricated pans, soldered seams, underlayment, and custom edge flashing; complexity and access move the price. |
| Standing seam copper or zinc full roof | Starting at $24/sq ft | Includes concealed-fastener panels, custom flashing, and snow guards where needed; pitch and roof geometry drive the final number. |
| Zinc or aluminum accent work | Starting at $18/sq ft | Covers dormer cheeks, turret caps, and trim; smaller scope and lighter metal lower the per-foot rate. |
| Historic restoration matching | On estimate | Requires an on-site look and often shop drawings to match original profiles, patina, and district review requirements. |
| Travel | Included | In Fort Wayne and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (260) 238-9399, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Elastomeric coating system | Starting at $2.50/sq ft | Includes wash, rust treatment, fastener check, and coating. Condition and pitch move the price. |
| Rust primer plus topcoat | Starting at $3.25/sq ft | Adds rust-inhibiting primer under the finish coat. Heavy rust or failed screws raise the cost. |
| Spot repair and recoat | Starting at $450 | Covers isolated rust and affected sections only. Roof size and access affect the final number. |
| Complex or large-scale job | On estimate | Steep roofs, dormers, heavy rust, or historic homes need an on-site look before pricing. |
| Travel | Included | in Fort Wayne and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (260) 238-9399, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Single penetration re-flash | Starting at $600 | Covers one chimney or skylight re-flash with standard access and no decking damage. |
| Multi-penetration or valley flashing | Starting at $950 | Covers two or more penetrations or a valley rebuild, priced by roof complexity and pitch. |
| Standing seam custom fabrication | On estimate | Seam-matched flashing requires an on-site profile measurement before we quote a number. |
| Rotted decking or sheathing repair | On estimate | Added only when the inspection finds soft wood under the flashing, priced after opening the roof. |
| Travel | Included | In Fort Wayne and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (260) 238-9399, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Snow guards above one door or walkway | Starting at $1,200 | Includes layout and installation of a staggered guard row over the main slide zone. |
| Multi-zone snow guard layout | Starting at $1,850 | Covers several doors, driveways, and gutters on a typical single-family metal roof. |
| Bar-style snow rails | Starting at $2,400 | Heavy-duty rails for steep roofs over entries, priced by linear feet and bracket count. |
| Eave ice protection package | Starting at $1,500 | Ice belt and drip-edge detailing to stop meltwater backup at gutters and fascia. |
| Barn or commercial snow guards | On estimate | Long roof runs and high snow loads need an on-site look before pricing. |
| Estimate | Free | Response within 24h at (260) 238-9399, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Storm damage inspection | Free | Full roof, attic and gutter inspection with photo documentation and a written repair vs. replace verdict |
| Screw replacement and re-fastening | Starting at $450 | Priced by roof size and screw count, common after high-wind events on exposed-fastener roofs |
| Panel, flashing and ridge cap repair | Starting at $850 | Covers labor and materials for localized damage, moves up with panel count and roof height |
| Partial or full replacement | On estimate | Widespread hail, tornado or deck damage needs an on-site scope and material match before pricing |
| Insurance documentation | Included | Photo log, measurements and adjuster meeting included with any repair or replacement job |
| Travel | Included | In Fort Wayne and surrounding areas, no separate call-out or mileage fee |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Standard residential inspection | Free estimate | On-roof inspection with photo report, included when you proceed with repair or replacement work |
| Stand-alone written inspection report | Starting at $250 | Flat fee for home sale, insurance, or second opinion, scaled by roof size and pitch |
| Post-storm insurance documentation | Starting at $300 | Detailed hail and wind damage report with photos and measurements for your adjuster |
| Commercial and agricultural inspection | On estimate | Large low-slope and barn roofs need an on-site look before we quote the inspection |
| Travel | Included | In Fort Wayne and surrounding communities, no separate call-out or mileage fee |
| Estimate | Free | Response within 24h at (260) 238-9399, no obligation to book |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Seamless K-style gutter, standard run | Starting at $9/linear ft | Includes seamless forming, hidden hangers, and standard downspouts on an accessible single-story run |
| Half-round gutter for historic homes | Starting at $14/linear ft | Includes snow-rated brackets and profile matched to trim on West Central and Lakeside homes |
| Guarded system for heavy leaf load | Starting at $13/linear ft | Includes micro-mesh or reverse-curve guard sized for maple and oak seed load |
| Commercial or barn box gutter | On estimate | Long runs, multiple outlets, and heavy brackets need an on-site look before pricing |
| Travel | Included | In Fort Wayne and surrounding areas, no separate call-out or mileage fee |
| Estimate | Free | Response within 24h at (260) 238-9399, no obligation to book |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Roof inspection and written scope | Free estimate | On-site inspection, measurements and photos, with a written scope and no obligation to book. |
| Repair and re-fastening | Starting at $450 | Screw replacement, new washers and flashing repairs; price moves with roof size and access. |
| Exposed-fastener panel re-roof | Starting at $3.25 per sq ft | New ribbed panels, fasteners and closures; moves with decking condition and insulation needs. |
| Standing seam commercial roof | On estimate | Concealed-fastener system sized to the span; needs an on-site look at purlins and structure. |
| Travel | Included | In Fort Wayne and surrounding counties, with no separate call-out or mileage fee. |
| Estimate response | Free | Response within 24 hours at (260) 238-9399, with no obligation to book. |
Indicative rates, actual cost varies with project size, materials, and site access. Free personalized estimate within 24h.
Homeowners searching for a metal roofing contractor near me in Fort Wayne need a crew that understands this climate and this housing stock, not a call center three states away. Fort Wayne Metal Roofing is your local source for metal roof installation, full replacement, retrofit re-roofs, and repairs on homes, barns, and commercial buildings across Fort Wayne, New Haven, Huntertown, Leo-Cedarville, and Grabill. From the Victorian and Italianate homes of West Central to the post-war brick ranches of Waynedale and the newer two-story builds in Aboite, we match the system to the structure and the snow load it actually carries.
Our network of licensed, insured local contractors works on steep pitches, under heavy tree cover, and on the large stock of 15 to 30 year old screw-down roofs that dominate this region. We know ice dams at the eaves, summer derechos, hail, and straight-line winds, and we know when a repair is the honest answer and when replacement is. Call (260) 238-9399 to schedule a free estimate.
Most metal roof leaks in Fort Wayne trace back to a short list of failures, and the leading cause is fasteners. On exposed-fastener roofs that are 15 to 30 years old, the EPDM sealing washers under each screw dry out, shrink, and crack. Once that seal fails, water walks straight down the fastener shank. Thermal movement works screws loose over decades, and seam separation on standing seam panels opens a path at the clip line when panels expand and contract against each other. Failed pipe boots, flashing at chimneys, skylights, and valleys, wind-lifted panels after a storm, and punctures from fallen limbs round out the list.
Ignoring a small leak is expensive. Water tracks along purlins and decking far from the point of entry, so the stain on your ceiling may sit ten feet from the actual gap. By the time it shows, sheathing is often rotted and insulation is saturated, and the repair scope grows. That is why we start with a proper metal roof leak repair inspection rather than a tube of sealant.
Here is the honest call. If the panels are sound and the problem is fasteners, a full screw replacement and re-fastening with new sealing washers often restores a watertight roof for a fraction of replacement cost. If seams are failing across the field or panels are perforated, replacement is the better money. We tell you which one you are looking at. Call (260) 238-9399 or request a free estimate.
We install the full range of metal systems, and the right one depends on your house, your budget, and how much maintenance you want to own. Standing Seam Metal Roofing uses concealed clips and no exposed screws, which makes it the premium choice for primary homes and the easiest to live with long term. Corrugated & Ribbed Panel Roofing is the economical workhorse for barns, workshops, and outbuildings. We also install Metal Shingle Roofing, Stone-Coated Steel Roofing, and Copper & Specialty Metal Roofing for accents and historic profiles.
The honest comparison is simple: standing seam costs more up front and has no exposed screws to service, while screw-down costs less and needs its fasteners checked and replaced over its life. When the deck is sound, Metal Roof Over Shingles (Retrofit) is a legitimate option. When it is not, tear-off is the right call.
Metal roof pricing in Fort Wayne is typically quoted per square foot for installations and often as a flat rate for repairs. The number depends on the panel system and metal gauge, roof pitch and complexity, whether we tear off or recover, decking condition, and access. We give typical ranges rather than fixed figures because final pricing depends on the roof and site conditions, and we would rather be accurate than cheap on paper. Some carriers may offer premium discounts for metal or impact-rated roofs, but that is between you and your insurer.
For a realistic starting point, see our pricing page, then request a free estimate or free roof inspection so we can price your actual roof.
After a storm, we inspect the roof and provide written documentation with photos that you may submit to your own insurer. We are not an insurance adjuster or agent, coverage decisions rest with your carrier, and we make no promise that a claim will be approved. We document what we find and leave the coverage call to the people who make it.
On permits: in most jurisdictions a permit is commonly required for a full replacement or re-roof, but requirements, thresholds, fees, and inspection rules vary by city and must be verified with the local building department. Historic district or HOA design review can also restrict panel profile and color. Requirements vary, always verify with the Fort Wayne building or planning department before starting your project. To schedule an inspection or ask a question, contact us.
Ready to get started? Fort Wayne Metal Roofing serves in Fort Wayne and surrounding areas. Get your free, no-obligation estimate today.
Get a Free EstimateMetal Roofing in Fort Wayne · Response within 24h · No commitment · ☎ (260) 238-9399
Your Free Quote Request